Lightbenders

Video of the Egyptian timer sequence:

Exciting progess on a Sliders’ timer!

These are lighting kits for X-wing models (but they’d work with any space ship, really).  Master model maker Jason Eaton consulted with us on the creation of this board.  Features include:

• On / off switch
• 8 – 5mm LEDs in a random flickering pattern (red / orange on a movie board, white on a McQuarrie-style board)
• 2 – 5mm warm white LEDs that are steady on
• 4 – 1mm LEDs (red, blue, green, yellow) with random blinking effect
• All LEDs are high-intensity
• All LEDs Connected via cable and pin connector
• PCB supports two possible power sources – 9v battery or 9v plug pack (aka wall wart)
• Small size:  2″ x 1.5″ x 3″
• Professionally manufactured circuit board using fiberglass FR4 stock, soldermask over bare copper (top & bottom), plated thru holes, solder-able finish, and silkscreen
• All parts used are first grade, new, manufacturers product meeting the full manufacturers specification.

Of course, we can always customize the LEDs performance to do whatever you’d like!  Just contact us.

$85. U.S. shipping included. International buyers, please contact us for an adjusted price including shipping. Ships in 1-2 weeks. Customizable programing available at an additional charge.

Colors

McQuarrie-style Movie-style

Power connector

Battery (not included) Plug pack (not included)

(Note:  In the videos the LEDs have been placed inside PVC to simulate the engine cans.)

Movie X-wing:
http://www.youtube.com/watch?v=wAmB6UQHw60

McQuarrie X-wing:
http://www.youtube.com/watch?v=Ghk50pzOF0g

Lightbenders is proud to present our pulse rifle counter board.  Designed with the assistance of pulse rifle expert Matsuo, this professionally-designed and  manufactured board is the ultimate in pulse rifle upgrades.

Features include:

• Small form factor:  1.9″ x 1.15″
• Pre-drilled holes match the mounting plates of most pulse rifles
• Simulated “short magazine” loading (counts down from 99 to 95 on load)
• Magazine counter reset capability
• 5-second push-and-hold counter reset (for those not using a magazine reset)
• 10 rounds per second countdown on trigger hold (simulating 600 rps Thompson machine gun)
• Off-board on / off switch for maximum flexibility of placement
• Professionally manufactured circuit board using fiberglass FR4 stock, soldermask over bare copper (top & bottom), plated thru holes, solder-able finish, and silkscreen
• All parts used are first grade, new, manufacturers product meeting the full manufacturers specification.

$80. U.S. shipping included. International buyers, please contact us for an adjusted price including shipping. Ships in 2-3 weeks. Customizable programing available (different countdown number start, different rps, etc.) at an additional charge.

With the help of Matsuo, undisputed master of all things pulse rifle, Lightbenders has designed a functioning pulse rifle counter.

Features include:

• Countdown from 95 when trigger is pressed (support for either a relay or a momentary switch)
• Powered by a small 3v battery (or a 9v)
• Mounting holes that fit the standard pulse rifle faceplate

Like all our boards, this one will be professionally plated and solder masked.

Although designed specifically for the X-Wing fighter, these boards could be used in any starship models.  These were designed with the help of master model-maker Jason Eaton.

• 8 randomly flickering LEDs (available in movie red/orange or McQuarrie blue)
• 2 “steady on” LEDs (warm white)
• 4 random blinking LEDs (red, blue, yellow, and green)
• On / off switch
• Operates on a 9v battery or a wall power adapter

We’re looking to release these mid-October.  Purchase information will be available on this site.  Of course, we can always customize colors if you’d like.  Just contact us.

We’ve created a bunch of fun products over at Zazzle that feature the fantastic Lightbenders’ logo created by Tim Jester.  There are mugs, t-shirts, and other wackiness.  Although this is mostly for us, you can support your favorite lighting designers.